Installation Manual:

Royal Bidet is installed in easy steps:
Unit includes: Adapter, rubber packing, flexible hose and manual

1. Remove toilet seat from bowl
2. Place Bidet’s adjustable bracket on toilet holes
3. Place washer & nuts to secure Bidet
4. Adjust Bidet’s nozzle to the center of bowl
5. Ensure the nozzle freely injects outwards
6. Firmly tighten both nuts of the toilet seat
7. Can be detached & re-installed with household tools.

Water Supply Connection:

1. Turn off water supply valve
2. Detach toilet water supply line from water supply valve
3. Install A “T” adapter to water supply valve or connect a “T” adapter to water tank inlet connection & tighten it (Apply taplon tape)
4. Connect the water tube of Royal Bidet to the outlet of the “T” adapter & tighten properly
5. Turn water supply and open water pressure controller of Bidet for use

Close water supply immediately if connections are not properly tightened.